Flashing via Serial line using ATK from Freescale (i.MX31)

From BlueWiki

Jump to: navigation, search

(tested with i.MX31 on DEV-i.MX31 Revision 2.1)

  • Install and start Advanced Toolkit (Windows program!)
  • select i.MX CPU: i.MX31 TO2
  • Device Memory initial: DDR
  • Select Serial Port (NOT USB)
  • Change boot mode on Devboard
    • 00001011 (1...8) ON = 1; OFF = 0
  • Select Flash Tool, click GO (!)
  • Flash Model: NOR S71....
  • Operation Type: Program
  • Select Image
  • Start Flashing (Takes a while)
  • Change Boot mode to normal:
    • 01011011 (1...8) ON = 1; OFF = 0
  • If the boot mode is changed, board must be resetted afterwards.
Personal tools