Argos 3D - P310 Software

From BlueWiki

Jump to: navigation, search

1 Bootloader

Take care when you perform a bootloader update! Loosing power during the update process may damage the flash content, makeing the device unusable! Make a bootloader update only if the new version contains features which are absolutely necessary for your application!

V1.0.0
Initial release
V1.1.0
Update
Changes from previous version:
Type Description
Bugfix Bugfixes to prevent unexpected behaviour
Modification Trigger in GPIO now correctly configured as input
Modification Trigger out GPIO now correctly configured as output
Modification LIMs are now disabled in Bootloader state (not supported by LIMs <V2.0.0)
V1.2.0
Update
Changes from previous version:
Type Description
Bugfix Bootloader did not delete user reg map on update
Feature Added network configured bootloader mode support

The bootloader binary files can be found on our customer software package CD downloadable here: download section.

2 Firmware

The firmware binary files can be found on our customer software package CD downloadable here: download section.

V1.0.0
Initial release
V1.1.0
Update
Changes from previous version:
Type Description
Feature Added LIM control
Feature Added temperature manager
V1.2.0
Update
Changes from previous version:
Type Description
Feature Improved temperature stability
Mod Changed temperature compensation factor 'a' to 1E-5 resolution (TempCompGradient3Lim, TempCompGradient3Tim, TempCompGradient3Baseboard)
V2.0.0
Update
Changes from previous version:
Type Description
Bugfix Fixed mirrored 3D image
Feature TIM firmware version is read into CPLD firmware version register
Bugfix Vertical and Horizontal FoV calculation corrected
Mod Removed wait time to reduce jitter in manual trigger mode
Mod Temperature compensation now active for all configurable modulation frequencies
Bugfix Temperature compensation will not stay deactivated after configuring an unsupported modulation frequency anymore
Feature Added support for network configured bootloader start and update (requires Bootloader V1.2.0 or higher)
Feature Added manual trigger burst mode

3 Support Matrices

Bootloader Hardware Support Matrix
The following table shows the compatibility list between different hardware and bootloader versions.
Bootloader Version 1.0.0 Bootloader Version 1.1.0 Bootloader Version 1.2.0
LIM-U-LED-850 Version 1.1.0 ok ok ok
LIM-U-LED-850 Version 2.1.0 ok ok ok
IF-MTK-310 Version 1.1.0 ok ok ok
IF-MTK-310 Version 1.2.1 ok ok ok
TIM-UP-19k-S3-Spartan-6 Version 1.0.0 ok ok ok
TIM-UP-19k-S3-Spartan-6 Version 2.0.0 ok ok ok
eCM-BF561 Version 1.1.0 ok ok ok
Firmware Support Matrix
The following table shows the compatibility list between different hard- and firmware versions.
Firmware Version 1.0.0 Firmware Version 1.1.0 Firmware Version 1.2.0 Firmware Version 2.0.0
LIM-U-LED-850 Version 1.1.0 ok ok ok ok
LIM-U-LED-850 Version 2.1.0 ok ok ok ok
IF-MTK-310 Version 1.1.0 ok ok ok ok
IF-MTK-310 Version 1.2.1 ok ok ok ok
TIM-UP-19k-S3-Spartan-6 Version 1.0.0 ok ok ok ok
TIM-UP-19k-S3-Spartan-6 Version 2.0.0 ok ok ok ok
eCM-BF561 Version 1.1.0 ok ok ok ok
Bootloader/Firmware Support Matrix
The following table shows the interoperability between different bootloader and firmware versions.
Firmware Version 1.0.0 Firmware Version 1.1.0 Firmware Version 1.2.0 Firmware Version 2.0.0
Bootloader Version 1.0.0 ok ok ok ok
Bootloader Version 1.1.0 ok ok ok ok
Bootloader Version 1.2.0 ok ok ok ok
Personal tools